本經驗均在CentOSrelease6.7(Final)下操作，如知識有欠缺之處 歡迎批評指正。
linux 的inode及block的相關知識：
1> Linux系統分區格式化文件系統之后，系統會分為Inode及Block兩部分：
1)Inode為系統文件的屬性信息（ls -l的結果）及指向文件實體的指針，但是沒有存放文件名，一般在上級目錄里的Block。
2)Block為存放數據的，ext3/ext4一般為1k,2k,4k,一般默認4k
3)一個文件不論多大至少占用一個Inode和一個Block，一個Block只能存放一個文件的內容，block的數量大于Inode的數量，多個文件可以占用同一個 inode(硬鏈接) 。
4）訪問文件, 通過文件-->inode(驗證權限)--->blocks.
5）inode 一般情況默認256B，block大小1k，2k，4k，默認4k,注意，引導分區等特殊分區除外。
6）通過df -i 查看inode的數量及使用情況,dumpe2fs /dev/sda1 查看inode及block的大小和數量。
7）一個block只能 被一個文件使用 ，如果一個文件很小block太大，剩余空間浪費，無法繼續被其他文件使用。
8）block不是越大越好，根據業務的文件大小進行選擇，一般就是默認 4k。
9）可以在格式化的時候改變inode及block的大小，使用mkfs.ext4 -b 2048 -I 1024 /dev/sdb2
2>Linux中df命令的功能是用來檢查linux服務器的文件系統的磁盤空間占用情況。可以利用該命令來獲取硬盤被占用了多少空間，目前還剩下多少空間等信息。
1．命令格式：
df [選項] [文件]
2.參數 :
df -i 查看參數多少個
[root@techW ~]# df -iFilesystem Inodes IUsed IFree IUse% Mounted on/dev/mapper/vg_techw-lv_root 1152816 55846 1096970 5% /tmpfs 125596 1 125595 1% /dev/shm/dev/sda1 128016 38 127978 1% /boot
df -h 查看磁盤大小：
[root@techW ~]# df -hFilesystem Size Used Avail Use% Mounted on/dev/mapper/vg_techw-lv_root 18G 1.5G 15G 9% /tmpfs 491M 0 491M 0% /dev/shm/dev/sda1 477M 36M 416M 8% /boot
查看當前系統分區的Inode及Block的總量及使用量：
[root@techW ~]# dumpe2fs /dev/sda1 | grep -i "block size"dumpe2fs 1.41.12 (17-May-2010)Block size: 1024[root@techW ~]# [root@techW ~]# [root@techW ~]# dumpe2fs /dev/sda1 | grep -i "inode size"dumpe2fs 1.41.12 (17-May-2010)Inode size: 128 ###boot分區為128，常規分區為256[root@techW ~]# [root@techW ~]# [root@techW ~]# dumpe2fs /dev/sda1 | grep -i "inode count"dumpe2fs 1.41.12 (17-May-2010)Inode count: 128016[root@techW ~]# [root@techW ~]# dumpe2fs /dev/sda1 | grep -i "block count"dumpe2fs 1.41.12 (17-May-2010)Block count: 512000Reserved block count: 25600
3>添加一塊磁盤，格式化，改變Inode及 Block的大小，掛載查看硬盤的Inode及Block數量：
1）添加一塊5G的磁盤，為方便區分設置為/dev/sdb，fdisk分區，然后mkfs.ext4格式化
（虛擬機增加一塊5G的硬盤，分區，格式化）
[root@techW ~]# fdisk /dev/sdbDevice contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabelBuilding a new DOS disklabel with disk identifier 0x2d37eabe.Changes will remain in memory only, until you decide to write them.After that, of course, the previous content won't be recoverable.Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u').Command (m for help): n ### add a new partitionCommand action e extended p primary partition (1-4)pPartition number (1-4): 2 ### 為做區分，選擇2First cylinder (1-652, default 1): Using default value 1Last cylinder, +cylinders or +size{K,M,G} (1-652, default 652): Using default value 652Command (m for help): w ### write table to disk and exitThe partition table has been altered!Calling ioctl() to re-read partition table.Syncing disks.分區時的參數命令：
a toggle a bootable flagb edit bsd disklabelc toggle the dos compatibility flagd delete a partitionl list known partition typesm print this menun add a new partitiono create a new empty DOS partition tablep print the partition tableq quit without saving changess create a new empty Sun disklabelt change a partition's system idu change display/entry unitsv verify the partition tablew write table to disk and exitx extra functionality (experts only)
[root@techW ~]# mkfs.ext4 /dev/sdb2mke2fs 1.41.12 (17-May-2010)Filesystem label=OS type: LinuxBlock size=4096 (log=2) ###默認的Block的大小為4096Fragment size=4096 (log=2)Stride=0 blocks, Stripe width=0 blocks327680 inodes, 1309289 blocks65464 blocks (5.00%) reserved for the super userFirst data block=0Maximum filesystem blocks=134217728040 block groups32768 blocks per group, 32768 fragments per group8192 inodes per groupSuperblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736Writing inode tables: done Creating journal (32768 blocks): doneWriting superblocks and filesystem accounting information: doneThis filesystem will be automatically checked every 26 mounts or180 days, whichever comes first. Use tune2fs -c or -i to override.
2）###inode的大小范圍為128-2048,block的大小范圍為1024-4096####
3)將Block和Inode的大小都改為2048：
[root@techW ~]# mkfs.ext4 -b 2048 -I 2048 /dev/sdb2mke2fs 1.41.12 (17-May-2010)Filesystem label=OS type: LinuxBlock size=2048 (log=1)Fragment size=2048 (log=1)Stride=0 blocks, Stripe width=0 blocks326400 inodes, 2618578 blocks130928 blocks (5.00%) reserved for the super userFirst data block=0Maximum filesystem blocks=540016640160 block groups16384 blocks per group, 16384 fragments per group2040 inodes per groupSuperblock backups stored on blocks: 16384, 49152, 81920, 114688, 147456, 409600, 442368, 802816, 1327104, 2048000Writing inode tables: done Creating journal (32768 blocks): doneWriting superblocks and filesystem accounting information: doneThis filesystem will be automatically checked every 30 mounts or180 days, whichever comes first. Use tune2fs -c or -i to override.
4)使用dumpe2fs命令查詢Inode和Block的大小：
[root@techW ~]# dumpe2fs /dev/sdb2 | grep "Inode size"dumpe2fs 1.41.12 (17-May-2010)Inode size: 2048 ###大小更改成功[root@techW ~]# s /dev/sdb2 | grep "Block size"dumpe2fs 1.41.12 (17-May-2010)Block size: 2048 ###大小更改成功
新聞熱點
疑難解答
圖片精選
